Design of Adaptive RFID on IoT Platform with Passive Tag Based on Laboratory Management System

  • Umar Ismat Mohd Nasri Faculty of Engineering Technology (Electrical and Automation) University College TATI, Jalan Panchor, Telok Kalong, 24000 Kemaman, MALAYSIA
  • Kharudin Ali University College TATI, Jalan Panchor, Telok Kalong, 24000 Kemaman, MALAYSIA
  • Damhuji Rifai University College TATI, Jalan Panchor, Telok Kalong, 24000 Kemaman, MALAYSIA
  • Ahmed N. Abdalla Faculty of Electronic Information Engineering, Huaiyin Institute of Technology, Huai'an, Jiangsu, China
  • Mooner A. Faraj Electrical and Electronics Engineering Department, Omar Al-Mukhtar University, Al-Baida, Libya
Keywords: RFID Tag and Reader, IoT platforms, UHF

Abstract

Radio Frequency Identification (RFID) refers to a wireless system
comprising two components: tags and readers. The reader is a device that
has one or more antennas that emit radio waves and receive signals back
from the RFID tag. RFID is available on most systems applications
especially involving security systems, including house/office access
systems, toll systems, and laboratory systems. Through this research, the
development of adaptive RFID on IoT platforms with different types of
passive tag laboratory systems highly emphasized monitoring the status
equipment besides maximum range detection and quantity of RFID tags is
analyse. This research also considering on double layer of securities for
equipment before crossing the laboratory gate. The frequency RFID are
860-900 MHz with the Ultra High Frequency (UHF) band due to its
affordability and ease of implementation. According on the result shows
for maximum RFID tag sticker can be detected on the same times are 7
units with the range 1m. Lastly the angle 80 until 100 degrees will giving
the maximum range of detection within 5.5m

Author Biographies

Umar Ismat Mohd Nasri, Faculty of Engineering Technology (Electrical and Automation) University College TATI, Jalan Panchor, Telok Kalong, 24000 Kemaman, MALAYSIA

Member of FTKEA (UC TATI)

Kharudin Ali, University College TATI, Jalan Panchor, Telok Kalong, 24000 Kemaman, MALAYSIA

Senior Lecturer at Faculty of Engineering Technology (UC TATI)

Damhuji Rifai, University College TATI, Jalan Panchor, Telok Kalong, 24000 Kemaman, MALAYSIA

Senior Lecturer Faculty of Engineering Technology (UC TATI)

Ahmed N. Abdalla, Faculty of Electronic Information Engineering, Huaiyin Institute of Technology, Huai'an, Jiangsu, China

Senior Lecturer at Huaiyin Institute of Technology, Huai'an, Jiangsu, China

Mooner A. Faraj, Electrical and Electronics Engineering Department, Omar Al-Mukhtar University, Al-Baida, Libya

Senior Lectuerer Omar Al-Mukhtar University, Al-Baida, Libya

Published
31-10-2023
How to Cite
Mohd Nasri, U. I., ALI, K., Rifai, D., N. Abdalla, A., & A. Faraj, M. (2023). Design of Adaptive RFID on IoT Platform with Passive Tag Based on Laboratory Management System . International Journal of Synergy in Engineering and Technology, 4(2), 105 - 118. Retrieved from https://www.ijset.tatiuc.edu.my/index.php/ijset/article/view/189